UNIX – General Command Lines


You MUST be at the ROOT user to make/save any changes. You will need to save your changes in the /etc/rc.conf file. Network cards are referred to as dc0, dc1, dc2, etc based on their position on the PCI bus.

Display Current Config for all NIC’s: ifconfig
Display Current Config for dc0: ifconfig dc0
Assign IP/Subnet: ifconfig dc0 inet 192.168.1.2 netmask 255.255.255.0
Assign Gateway: route delete default && route add default 192.168.1.1
Assign multiple IP’s: ifconfig dc0:0 192.168.1.2
Assign second IP: ifconfig dc0:1 192.168.1.3
Disable network card: ifconfig dc0 down
Enable network card: ifconfig dc0 up

out_link

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

%d bloggers like this: